Thursday, January 19, 2012

MOPAR QUESTIONS AND ANSWERS U GOT QUESTION I GOT ANSWERS or SITES?

Does any one have any questions about Mopar or anything like that or u just wanna talk about mopar type meMOPAR QUESTIONS AND ANSWERS U GOT QUESTION I GOT ANSWERS or SITES?
I own a shop, and work on them all the time. If I have any questions, it is good to know I have someone who can help me out. I will keep you in mind.

Glad to help out, Good Luck!!!MOPAR QUESTIONS AND ANSWERS U GOT QUESTION I GOT ANSWERS or SITES?
i need types and history of mopar muscle cars

Report Abuse

MOPAR QUESTIONS AND ANSWERS U GOT QUESTION I GOT ANSWERS or SITES?
ok how do i stay on mopar for more then 2 minutes????and can u tell me how i can fix it?

9 comments:

  1. I have a 69 440 totally rebuilt and has Weiand hi rise tunnel ram w/dual 550 Edelbrocks.Hooker super comp headers,new clutch, HD bell housing, starter,alternater,power steering pump,driveshaft, K&N air filters w/cleaners. Weiand valve covers. Traded my truck for it to save a long distance trip. Don't have all the specs but can someone give me a ballpark on value? Thanks for your help.

    ReplyDelete
  2. I have a question I was pulling my valve covers off of my 2006 Dodge Daytona Top Banana Edition when I noticed it had a criminally substance at the top of the valve covers not two and a half years ago we replace the motor after remember one valve unseated and went into the piston or I should say rebuilt the motor so the motor is still fairly new we stripped it down and sent the blocking to get machined came back reassembled it with all new gaskets and hoses and all that stuff so I guess what I'm trying to find out is an educated diagnosis on if this is not as serious as a head gasket if it could be condensation in there if it could be that we didn't run the steps after heating it up and cooling it down we didn't go through and retighten so I don't know if that's the problem I'm just trying to not Chase my tail around this motor again trying to figure out what could be wrong

    ReplyDelete
  3. I have a question ..how do I turn my fog lamps on in a 2004 Jeep Liberty

    ReplyDelete
  4. 72 challenger, when switching from a small block with a 904 to a big block with a 727 does the transmission crossmember have to be changed?

    ReplyDelete
  5. My family had a 69 coronet 500.It had the R/T decal on the grill,but this car had 318 auto.Someone at the time said it had the r/t suspension. Anyone know if they could be ordered that way?

    ReplyDelete
  6. Got a new V6 Ram runs at up to 219 degrees? (Oil and water)
    Yikes! Normal?

    ReplyDelete
  7. Thanks Andy. My 2013 trade in Ram 1500 ran at 201 F My brand new 2020 V6 1500 with 33 miles on it is running at 212 to 219 F. Looks really high to me.

    ReplyDelete
  8. Can i install a 5.7 hemi from a 2006 grand cherokee into a 2004 ram 1500 with 5.7?

    ReplyDelete